The Ruckus access points are some of the easiest to install AP’s on the market! Just plug and play!
Below is the simple step to show exactly how easy they are to set up using your mobile device!
Download the Ruckus Unleashed app from your mobile app store. This Application is available for both Android and iOS platform users. |
Once you have the Ruckus Unleased app, Plug the access point into your network via ethernet cable, you can either power through POE (Power Over Ethernet) or 12v power supply. Once complete, proceed to Step 1
Step 1 View your available networks and Connect to Configure.Me.. (Where you see 1807D0, these are final 6 digits When the device is connected to configure.me |
Step 2 After connecting to the configure.me Select the Typical Install to start the setup procedure.
|
Step 3 Once connected, Press the blue start button within your Unleashed app.
|
Step 4 By default, the access point will be set to Automatic (DHCP), this means the access point will get the |
Step 5 It is recommended to assign a static to each |
Step 6 Set up your WLAN name (SSID), this is what users You then set up your WLAN password. Select when the country where the AP is located. |
Step 7 Setup your admin username and password. |
Step 8 This allows you to set up a password recovery |
Step 9 This is a chance to verify your configuration and It is advised to note your configurations, Once
|
Step 10 Once the Unleashed Master configuration has |
|
|
Step 11 Once rebooted, you will be prompted to |
That's it, you are now connected.
More information on the Unleashed APP please see the Ruckus Mobile APP Page
If you experience any issues or require additional help, please contact our support centre.